Please fill out the following form. If you have any questions please contact the computer lab. COST: of finished object is 20 cents/gram MATERIAL: PLA Plastic SIZE: Maximum build size is: Nichols: 11(L) x 11(W) x 9.8(H) inches Naper Blvd.: 11.2(L) x 6.0(W) x 6.1(H) inches 95th St: 11.5(L) x 11.5(W) x 15.5(H) inches FILE REQUIREMENTS: Allowed file type: stl File must be designed in millimeters(mm). File must be less than 25 MB. Contact Information Name * Phone * Email Address * Usage * EducationalPersonalProfessional Object Information Pickup Location * - Select -NicholsNaper Blvd.95th Street 3D Printing at Nichols is temporarily unavailable. You can still print to 95th Street. Choose Color (95th) * - Select -BlackBlueBrownGreenGreyPinkPurpleRedWhiteThe objects can be created in only one color. Choose Color (Naper Blvd.) * - Select -BlackBlueGreenPurpleRedWhiteThe objects can be created in only one color. Choose Color (Nichols) * - Select -BlackBlueGreenPurpleRedWhiteThe objects can be created in only one color. Desired Size * Maximum build size is 11.2(L) x 6.0(W) x 6.1(H) inches at 95th St., 11(L) x 11(W) x 9.8(H) inches at Nichols Maximum cost you are willing to pay Cost of the finished object is 20 cents/gram Requests may take up to 7-10 days to complete. You will be contacted when the print request is ready for pickup. File Source Upload File * More informationFiles must be less than 26 MB. Allowed file types: stl. If your file fails to load: 1. Please rename the file and try again. 2. Allowed file type: stl. File must be less than 25 MB. If you have any questions please contact the computer lab. Other Information Math question * 1 + 0 = Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
